I made two planters like the one at the left for Mother’s Day- one for my mother and the other for my mother-in-law. It was super easy, and I loved the finished project so much that I am going to make one for myself. Even though this is not something you can do in the classroom with your students, I thought I would share because I have had several people (after seeing pictures on Facebook) ask me for the tutorial.
A tarp/ old shower curtain liner
1 8” terracotta pot
4 6” Terracotta pots
1 4.5” Terracotta pot
60” of rebar- I had to get a 10 footer and then cut it in half.
Hacksaw for cutting rebar – Home Depot sells them for about $5
Black Spray Paint
White Spray Paint
Mod Podge- liquid and spray – I used matte not glossy
White printing paper – thinner is better
Lay out your tarp or shower curtain liner to prevent paint from getting on your floors or grass. As you will see in the pictures, I did not do this, and now I have spray paint on my grass. I am not too concerned because it is in the spot where my redneck pool will be set up in a few days so it will be covered. (More on my redneck pool another time).
Spray paint all of the terracotta pots black.
PLEASE do yourself a favor and spray paint the inside of the pots as well as the outside. My husband tried to get me to skimp on this step to save some spray paint, but I wouldn’t cave! Yes, I know the pots will be filled with soil, but I didn’t want to finish this fabulous project only to have the heinous, orange inside of the pot peeking out at me. Not even a smidgen. How tacky. Paint the inside of the pots. Do it.
Rub candle wax all over the pots. This is called a “wax resist” technique and it will help when you distress your pots. I had no idea how to rub candle wax on my pots. When I was reading about distressing objects and wax resist, all that was said was, “rub object with candle wax”. Ok, so did that mean I was supposed to melt the wax a little and rub it on or what? I asked my friends on Facebook, and no one knew. I tried to you tube videos… nada. Finally, a friend of mine (who happens to be an art teacher) told me that I was supposed to take a taper candle and rub the end on the pot. So I have included a picture of this step in case you are as craftily challenged as I am.
Now it is time to spray paint the pots white. Inside AND out.
Sand your pots to get your desired look. Sand the rim, the body, and the base lightly so that the black paint will show through just slightly.
Add the labels. This is where you will need to do some Google searching. I searched French Typography and found clipart that I could use. You can also use fonts and clipart on your computer to create your own labels. FontSpace has some really cool fonts that are free and they have French graphics as well. The Graphics Fairy is my favorite though. In fact, I would check here first. She has French fonts and clipart for free. She also gives suggestions on ways to transfer your images.
Once you have your selected art, print them out on white paper. The Graphics Fairy has other suggestions for transferring your art to objects such as a clear paper, but I chose not to do that. I was trying to stay as economical as possible, and so I did not want to purchase special paper. Printer paper worked just fine for me.
After cutting out my labels (I cut as close to the art as I could), I used mod podge liquid to adhere them to the pot. I let them dry and then I sprayed the pot with matte mod podge sealer.
Cut your rebar with the hacksaw to 5 feet. Insert your rebar into the ground- hammer it in a good bit.
Do a trial run before filling your pots with soil.
Slide your largest pot onto the bar and move it to the bottom. DO NOT PUT SOIL IN YOUR POTS BEFORE YOU SLIDE THEM ON THE REBAR.
Put soil in the largest pot- do not add flowers yet.
Then slide the next largest set of pots- slanting them to the left or right to stagger them. They should sit on the soil of the pot below or just off of the pot. Add soil to each pot after you slide it on.
Finally, add the smallest pot. You may have rebar left at the top. You can add a birdhouse like my mother did, or add a pot with a bowl like my mother-in-law. Or you can cut the rest of the rebar off.
Plant flowers in the open spaces. There you have it! A Magnifique Shabby Chic Planter!